• Automotive
  • Performance

Ultimate Dana 60™ Axle for the Jeep Gladiator JT

Share

The Premium Choice for Serious Off-Roading

Ultimate Dana 60™ Axles Deliver Ultimate Performance for Your Jeep®

Ultimate 60 Logo When off-roading Jeep® owners modify their axles for even better performance over rocks, across sand, and through mud, Dana takes notice. The Ultimate Dana 60™ axle incorporates many of these modifications and innovations, so you get premium performance right from the start. Engineered to be a direct-fit, bolt-in solution for the Jeep Gladiator JT, Ultimate Dana 60™ axles are built for superior strength inside and out.

The Ultimate Dana 60™ axle incorporates many of the upgrades serious Jeep enthusiasts demand.

Ultimate Dana 60 Axle
Ultimate Dana 60 Front Axle

Engineered to Ensure Optimal Strength and Durability

The full-float design of the Ultimate Dana 60™ axle means that the vehicle weight is carried by the housing instead of the shaft. So, you can enjoy a greater load-carrying ability wherever your Jeep takes you. The Ultimate Dana 60™ axle features Spicer® 35 spline SAE-4340 nickel chromoly steel axle shafts to help meet the rigors of off-road, providing maximum strength and durability for vehicles with larger tires.

Ultimate 60 Rear Axle
Ultimate Dana 60 Rear Axle

Ultimate Dana 60™ axles are designed to give you an advantage across even the most brutal terrain:

  • Spicer® 35 spline SAE-4340 nickel chromoly steel axle shafts
  • Axle tubes: 3.5" outside diameter/.370" (front) or .390" (rear) wall thickness
  • Spicer® ring and pinion gearing: 10" (256 mm) on front axles and 9.75" (248 mm) on rear
  • Genuine “Made in the USA” gearing
  • Heavy-duty 8" x 6.5" wheel bolt pattern
  • Nodular iron diff cover
  • Selectable electronic locking differentials
  • Heavy-duty brackets
  • Spicer® 1350 strap-style/half-round end yoke
  • Upgraded heavy-duty brakes with plug-and-play ABS system
  • Dead spindle design (front)
  • Massive Spicer® SPL®-70 u-joints—exclusive to Dana (front)
  • Upper and lower control arms in same location as OE (front)
  • Warn® 35 spline hub locks (front)
Ultimate Dana 60 Callout

The Ultimate Dana 60™ Crate Axles (Bolt In Axle Assembly)

Application Front Axle Part # Rear Axle Part #
2020 and Newer Gladiator JT - 3.73 Ratio with Eaton ELocker® 10056042 10128131
2020 and Newer Gladiator JT - 4.10 Ratio with Eaton ELocker® 10056043 10128129
2020 and Newer Gladiator JT - 4.88 Ratio with Eaton ELocker® 10056032 10128143
2020 and Newer Gladiator JT - 5.38 Ratio with Eaton ELocker® 10056030 10128137
2020 and Newer Gladiator JT - 4.88 Ratio with ARB® Air Locker® 10088914 10128141
2020 and Newer Gladiator JT - 5.38 Ratio with ARB® Air Locker® 10088915 10128139

Related Parts

Description Spicer Part #
E-Locker Wire Harness Kit 10021771
JT Front Driveshaft - 1350 Series (Long Slip) 10097841
JT Rear Driveshaft - 1350 Series 10132306
Performance Nodular Iron Diff Cover (with hardware) - Front UD60™ 10024011
Performance Nodular Iron Diff Cover (with hardware) - Rear Dana 60™ 10024090
Steering Arm Kit - Front UD60™ 10024009
Wheel Joint - 1550/SPL70  SPL70-4X
Dana 60™ 35 Spline Drive Flange Kit 10028883
Dana Blue Wheel Joint - 1550/SPL70 SPL70-1550XC
Ball Joint Kit - Upper and Lower for One Side 2016801
U-Joint Strap Kit 3-70-28X
End Yoke Assembly 10015235

Ultimate Dana 60 Front Axle Rebuild Specs for Jeep® Gladiator JT

Differential Specifications USA Metric Dana Part#
Ring Gear Bolt 148 – 170 ft-lbs 200 - 230 Nm 40638
Bearing Cap Bolt 70 - 90 ft-lbs 95 - 122 Nm 48632-2
Pinion Nut 220 – 500 ft-lbs 298 - 678 Nm 30271
Ring Gear Backlash 0.005” - 0.008” .13 - .20 mm  
Diff Cover Bolt 40 - 50 ft-lbs 54 - 60 Nm N/A
Diff Cover Plug 15 - 25 ft-lbs 20 - 34 Nm  
Spindle Nuts 55 - 63 ft-lbs 75 - 85 Nm 43075
Lubricant Type SAE 75W-140 Gear Lubricant  
Lubricant Capacity 2.15 qts 2.0L  
Drive Pinion and Total Torque to Rotate
Pinion Torque to Rotate (PTR) 20 - 45 in-Ibs 2.2 - 3.04 Nm  
Total Torque to Rotate (PTTR)      
Gear Ratio USA Metric Dana Part#
3.73 PTR + 4.1 / 8.5 PTR + 0.46 / 0.96 2013462
4.10 PTR + 3.7 / 8.2 PTR + 0.42 / 0.92 84674
4.56 PTR + 3.4 / 7.8 PTR + 0.38 / 0.88 N/A
4.88 PTR + 3.1 / 7.5 PTR + 0.35 / 0.85 84676
5.13 PTR + 2.9 / 7.3 PTR + 0.33 / 0.83 N/A
5.38 PTR + 2.8 / 7.2 PTR + 0.32 / 0.82 84677
ARB 4.88 PTR + 7.6 / 13 PTR + 0.86 / 1.47 84676
ARB 5.38 PTR + 7.3 / 12.7 PTR + 0.83 / 1.44 84677

Ultimate Dana 60 Rear Axle Rebuild Specs for Jeep® Gladiator JT

Differential Specifications USA Metric Dana Part#
Ring Gear Bolt 148 – 170 ft-lbs 200 - 230 Nm 40638
Bearing Cap Bolt 70 - 90 ft-lbs 95 - 122 Nm 48632-2
Pinion Nut 220 – 500 ft-lbs 298 - 678 Nm 30271
Ring Gear Backlash 0.005” - 0.008” .13 - .20 mm  
Diff Cover Bolt 40 - 50 ft-lbs 54 - 60 Nm N/A
Axle Shaft Bolts 90 - 120ft-lbs 122 - 163 ft-lbs  
Lubricant Type SAE 75W-140 Gear Lubricant  
Lubricant Capacity 2.75 qts 2.6L  
Drive Pinion and Total Torque to Rotate
Pinion Torque to Rotate (PTR) 20 - 45 in-Ibs 2.25 - 3.08 Nm  
Total Torque to Rotate (PTTR)      
Gear Ratio USA Metric Dana Part#
3.73 PTR + 4.1 / 8.5 PTR + 0.46 / 0.96 76089X
4.10 PTR + 3.7 / 8.2 PTR + 0.42 / 0.92 76047X
4.56 PTR + 3.4 / 7.8 PTR + 0.38 / 0.88 N/A
4.88 PTR + 3.1 / 7.5 PTR + 0.35 / 0.85 25334X
5.13 PTR + 2.9 / 7.3 PTR + 0.33 / 0.83 N/A
5.38 PTR + 2.8 / 7.2 PTR + 0.32 / 0.82 27518X
ARB 4.88 PTR + 7.6 / 13 PTR + 0.86 / 1.47 25334X
ARB 5.38 PTR + 7.3 / 12.7 PTR + 0.83 / 1.44 27518X

Demand the Biggest, Strongest Axles Available

Gain a true competitive advantage as you take on the toughest off-road trails with high-performance Ultimate Dana 60™ axles.

Contact your Spicer parts dealer today to discover all the features and benefits of the Ultimate Dana 60™ axles!

Jeep, Spicer, and Dana — Legendary Brands Built Stronger Together. Read Our Story

Whats the Diff?

 

What's the difference (or diff) between Spicer® Parts and the competition? Click here to find out.

cancel